CVE’s

In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.

The function hso_get_config_data in drivers/net/usb/hso.c in the Linux kernel through 4.19.8 reads if_num from the USB device (as a u8) and uses it to index a small array, resulting in an object out-of-bounds (OOB) read that potentially allows arbitrary read in the kernel address space.

An issue was discovered on Sigma Design Z-Wave S0 through S2 devices. An attacker first prepares a Z-Wave frame-transmission program (e.g., Z-Wave PC Controller, OpenZWave, CC1110, etc.). Next, the attacker conducts a DoS attack against the Z-Wave S0 Security version product by continuously sending divided "Nonce Get (0x98 0x81)" frames. The reason for dividing the "Nonce Get" frame is that, in security version S0, when a node receives a "Nonce Get" frame, the node produces a random new nonce and sends it to the Src node of the received "Nonce Get" frame. After the nonce value is generated and transmitted, the node transitions to wait mode. At this time, when "Nonce Get" is received again, the node discards the previous nonce value and generates a random nonce again. Therefore, because the frame is encrypted with previous nonce value, the received normal frame cannot be decrypted.

An issue was discovered on KT MC01507L Z-Wave S0 devices. It occurs because HPKP is not implemented. The communication architecture is APP > Server > Controller (HUB) > Node (products which are controlled by HUB). The prerequisite is that the attacker is on the same network as the target HUB, and can use IP Changer to change destination IP addresses (of all packets whose destination IP address is Server) to a proxy-server IP address. This allows sniffing of cleartext between Server and Controller. The cleartext command data is transmitted to Controller using the proxy server's fake certificate, and it is able to control each Node of the HUB. Also, by operating HUB in Z-Wave Pairing Mode, it is possible to obtain the Z-Wave network key.

Amazon AWS SDK <=2.8.5 for Android uses Android SharedPreferences to store plain text AWS STS Temporary Credentials retrieved by AWS Cognito Identity Service. An attacker can use these credentials to create authenticated and/or authorized requests. Note that the attacker must have "root" privilege access to the Android filesystem in order to exploit this vulnerability (i.e. the device has been compromised, such as disabling or bypassing Android's fundamental security mechanisms).

Anker Nebula Capsule Pro NBUI_M1_V2.1.9 devices allow attackers to cause a denial of service (reboot of the underlying Android 7.1.2 operating system) via a crafted application that sends data to WifiService.

IBM WebSphere MQ 8.0.0.0 through 9.1.1 could allow a local user to inject code that could be executed with root privileges. This is due to an incomplete fix for CVE-2018-1792. IBM X-ForceID: 154887.

A buffer overflow vulnerability in the DHCP and PPPOE configuration interface of the Auerswald COMfort 1200 IP phone 3.4.4.1-10589 allows a remote attacker (authenticated as simple user in the same network as the device) to trigger remote code execution via a POST request (ManufacturerName parameter) to the web server on the device. The web server is running with root privileges and the injected code will also run with root privileges.

A command injection (missing input validation, escaping) in the ftp upgrade configuration interface on the Auerswald COMfort 1200 IP phone 3.4.4.1-10589 allows an authenticated remote attacker (simple user) -- in the same network as the device -- to trigger OS commands (like starting telnetd or opening a reverse shell) via a POST request to the web server.

In YARA 3.8.1, bytecode in a specially crafted compiled rule is exposed to information about its environment, in libyara/exec.c. This is a consequence of the design of the YARA virtual machine.