CVE
Vendors
Products
Updated
CVSS v2
CVSS v3
MuleSoft is aware of a Server Side Request Forgery vulnerability affecting certain versions of a Mule runtime component that may affect both CloudHub and on-premise customers. This affects: Mule 3.8.x,3.9.x,4.x runtime released before February 2, 2021.
MuleSoft is aware of a Remote Code Execution vulnerability affecting certain versions of a Mule runtime component that may affect both CloudHub and on-premise customers. Versions affected: Mule 4.1.x and 4.2.x runtime released before February 2, 2021.
A vulnerability in the Zone-Based Policy Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent the Zone-Based Policy Firewall from correctly classifying traffic. This vulnerability exists because ICMP and UDP responder-to-initiator flows are not inspected when the Zone-Based Policy Firewall has either Unified Threat Defense (UTD) or Application Quality of Experience (AppQoE) configured. An attacker could exploit this vulnerability by attempting to send UDP or ICMP flows through the network. A successful exploit could allow the attacker to inject traffic through the Zone-Based Policy Firewall, resulting in traffic being dropped because it is incorrectly classified or in incorrect reporting figures being produced by high-speed logging (HSL).
Sd-wan_firmware, Vedge-100, Vedge-1000, Vedge-100b, Vedge-2000, Vedge-5000, Vedge_100m, Vedge_100wm, Hyperflex_hx220c_m5_firmware, Hyperflex_hx220c_m5
2021-10-05
N/A
8.6 HIGH
A vulnerability in the Rate Limiting Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization in the Cisco QuantumFlow Processor of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to mishandling of the rate limiting feature within the QuantumFlow Processor. An attacker could exploit this vulnerability by sending large amounts of traffic that would be subject to NAT and rate limiting through an affected device. A successful exploit could allow the attacker to cause the QuantumFlow Processor utilization to reach 100 percent on the affected device, resulting in a DoS condition.
Sd-wan_firmware, Vedge-100, Vedge-1000, Vedge-100b, Vedge-2000, Vedge-5000, Vedge_100m, Vedge_100wm, Hyperflex_hx220c_m5_firmware, Hyperflex_hx220c_m5
2022-07-08
N/A
7.7 HIGH
A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition.
Sd-wan_firmware, Vedge-100, Vedge-1000, Vedge-100b, Vedge-2000, Vedge-5000, Vedge_100m, Vedge_100wm, Hyperflex_hx220c_m5_firmware, Hyperflex_hx220c_m5
2021-11-23
N/A
8.6 HIGH
A vulnerability in the Common Open Policy Service (COPS) of Cisco IOS XE Software for Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause resource exhaustion, resulting in a denial of service (DoS) condition. This vulnerability is due to a deadlock condition in the code when processing COPS packets under certain conditions. An attacker could exploit this vulnerability by sending COPS packets with high burst rates to an affected device. A successful exploit could allow the attacker to cause the CPU to consume excessive resources, which prevents other control plane processes from obtaining resources and results in a DoS.
Sd-wan_firmware, Vedge-100, Vedge-1000, Vedge-100b, Vedge-2000, Vedge-5000, Vedge_100m, Vedge_100wm, Hyperflex_hx220c_m5_firmware, Hyperflex_hx220c_m5
2022-10-24
N/A
7.4 HIGH
A vulnerability in the Layer 2 punt code of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a queue wedge on an interface that receives specific Layer 2 frames, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of certain Layer 2 frames. An attacker could exploit this vulnerability by sending specific Layer 2 frames on the segment the router is connected to. A successful exploit could allow the attacker to cause a queue wedge on the interface, resulting in a DoS condition.
Sd-wan_firmware, Vedge-100, Vedge-1000, Vedge-100b, Vedge-2000, Vedge-5000, Vedge_100m, Vedge_100wm, Hyperflex_hx220c_m5_firmware, Hyperflex_hx220c_m5
2021-10-13
N/A
7.7 HIGH
A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.
A vulnerability in the authentication, authorization, and accounting (AAA) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass NETCONF or RESTCONF authentication and do either of the following: Install, manipulate, or delete the configuration of an affected device Cause memory corruption that results in a denial of service (DoS) on an affected device This vulnerability is due to an uninitialized variable. An attacker could exploit this vulnerability by sending a series of NETCONF or RESTCONF requests to an affected device. A successful exploit could allow the attacker to use NETCONF or RESTCONF to install, manipulate, or delete the configuration of a network device or to corrupt memory on the device, resulting a DoS.
Multiple vulnerabilities in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to conduct a path traversal or command injection attack on an affected system. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by using the web-based management interface to do one or both of the following: Execute a command using crafted input Upload a file that has been altered using path traversal techniques A successful exploit could allow the attacker to read and write arbitrary files or execute arbitrary commands as root on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
